• PIXIM SEAWOLF 690HTVL-E
• 40 Meters IR Range
• IP-55 Weather-Proof Dome
• Powe Input: 12V DC
• Lens: 4-9mm
• OSD ( cable driven)
• WDR:120DB(max)
• 3D-DNR(Digital Noise Reduction)

http://www.pixim.com/pixim-powered-cameras?company=Xavee

SEAWOLF Image Sensor:
This camera adopts innovative DPS(Digital Pixel System) image sensor and image processing
technology. The sensor picks up details from each pixel based on hundreds of samples per video frame.
vs CCD's limited exposures, to ensure wider dynamic range than is possible with analog CCD. The
image quality is even brilliant under extreme lighting conditions. Changeable lighting condition.

Ultra Wide Dynamic Range
The captured wide dynamic range is 102dB typical and can reach 120dB maximum.

High Effective Resolution
Image resolution as high as 690TVL-E, offering enhanced horizontal and vertical resolution useable in
existing as well as new CCTV systems.

3D Noise Eliminating Technology
Adopts Pixim fully digitalized 3D noise reduction technology to minimize noise, extending DVR storage up to 30%+.

Long-life IR Light Source Design
Adopts high performance IR LED and heat balance design, effectively extends the service life of LED.

All directional bracket
All directional bracket, easy control.

OSD Menu*
Powerful OSD menu operation function, allows for setting of various parameters and pre-sets.

WDR Control:
Press Enter to show the menu, move the cursor to WDR Control, set MEDIUM, NORMAL, LOW,
HIGH by left and right button; choose the setting for WDR in accordance with the lighting condition,
set High in strong lighting contrast to realize higher quality image.WDR ZONE SELECT:WD
NROMAL/SAFE AREA/ATM/LOW 1/3.
BLC:
move to BLC by Up and Down button, set BLC by Left and Right button: On and Off.
WHITE BALANCE:
Move to White Balance by Up and Down button, set White balance by Left and Right button: AWB:
Auto White Balance; ATW: Auto Tracking White Balance. The color's temperature are different in
different lighting condition, The color's temperature changes in different lighting condition, so the
white color in video image changes if the lighting condition changes. AWB means cameras can
compensate color temperature automatically. In some special environment, in order to keep the same
color temperature , ATW setting can keep a fixed color temperature
AGC:
Move cursor to AGC by Up and Down button, set AGC by Left and Right Button as : NORMAL, LOW
and HIGH. Setting AGC is better for cameras to work in wider lighting range, if the illumination is low,
can set AGC high to rise the sensitivity of cameras.
LENS SELECT:
Move cursor to LENS SELECT, set LENS SELECT by Right and Left button as :MANUAL,DC:DC
Automatically. MANUAL FOR MANUAL IRIS LENS, DC for AUTO IRIS LENS.
FLUORESCENT:
Move cursor to FLUORESCENT by Up and Down button, set by Left and Right button as: OFF, CRR2:
Color Rolling Restrain. Cameras output color rolling image under fluorescent lamp, CRR can restrain
Color rolling, keep the image stable.
D/N Control:
Move cursor to D/N Control by Up and Down button, set D/N by Left and Right button as: OFF;
Auto; GPIO: External Control; On. The illumination is very low at night, so we need to rise the
sensitivity and improve imaging quality, then we can get better image quality. Set D/N in accordance
with different actual need.
SAVE&EXIT:
Move cursor to SAVE&EXIT by Up and Down button, set by Left and Right button as :
SAVE&EXIT;DEFAULT,CANCEL.
LANGUAGE SELECT:
Move cursor to LANGAGE SELECT by Up and Down button, set by Left and Right button as :
ENGLISH;CHINESE.