For More Detail specs, please click on "Product Specs"
Tab
SEAWOLF Image Sensor:
This camera adopts innovative DPS(Digital Pixel
System) image sensor and image processing
technology. The sensor picks up
details from each pixel based on hundreds of samples per video frame.
vs
CCD's limited exposures, to ensure wider dynamic range than is possible with
analog CCD. The
image quality is even brilliant under extreme lighting
conditions. Changeable lighting condition.
Ultra Wide Dynamic Range
The captured wide dynamic range is 102dB
typical and can reach 120dB maximum.
High Effective Resolution
Image resolution as high as 690TVL-E, offering
enhanced horizontal and vertical resolution useable in
existing as well as
new CCTV systems.
3D Noise Eliminating Technology
Adopts Pixim fully digitalized 3D noise
reduction technology to minimize noise, extending DVR storage up to 30%+.
Long-life IR Light Source Design
Adopts high performance IR LED and heat
balance design, effectively extends the service life of LED.
All directional bracket
All directional bracket, easy control.
OSD Menu*
Powerful OSD menu operation function, allows for setting of
various parameters and pre-sets.
WDR Control:
Press Enter to show the menu, move the cursor to WDR
Control, set MEDIUM, NORMAL, LOW,
HIGH by left and right button; choose the
setting for WDR in accordance with the lighting condition,
set High in
strong lighting contrast to realize higher quality image.WDR ZONE
SELECT:WD
NROMAL/SAFE AREA/ATM/LOW 1/3.
BLC:
move to BLC by Up and
Down button, set BLC by Left and Right button: On and Off.
WHITE
BALANCE:
Move to White Balance by Up and Down button, set White balance by
Left and Right button: AWB:
Auto White Balance; ATW: Auto Tracking White
Balance. The color's temperature are different in
different lighting
condition, The color's temperature changes in different lighting condition, so
the
white color in video image changes if the lighting condition changes.
AWB means cameras can
compensate color temperature automatically. In some
special environment, in order to keep the same
color temperature , ATW
setting can keep a fixed color temperature
AGC:
Move cursor to AGC by Up
and Down button, set AGC by Left and Right Button as : NORMAL, LOW
and
HIGH. Setting AGC is better for cameras to work in wider lighting range, if
the illumination is low,
can set AGC high to rise the sensitivity of
cameras.
LENS SELECT:
Move cursor to LENS SELECT, set LENS SELECT by
Right and Left button as :MANUAL,DC:DC
Automatically. MANUAL FOR MANUAL
IRIS LENS, DC for AUTO IRIS LENS.
FLUORESCENT:
Move cursor to
FLUORESCENT by Up and Down button, set by Left and Right button as: OFF,
CRR2:
Color Rolling Restrain. Cameras output color rolling image under
fluorescent lamp, CRR can restrain
Color rolling, keep the image
stable.
D/N Control:
Move cursor to D/N Control by Up and Down button,
set D/N by Left and Right button as: OFF;
Auto; GPIO: External Control; On.
The illumination is very low at night, so we need to rise the
sensitivity
and improve imaging quality, then we can get better image quality. Set D/N in
accordance
with different actual need.
SAVE&EXIT:
Move cursor to
SAVE&EXIT by Up and Down button, set by Left and Right button as
:
SAVE&EXIT;DEFAULT,CANCEL.
LANGUAGE SELECT:
Move cursor to
LANGAGE SELECT by Up and Down button, set by Left and Right button as
:
ENGLISH;CHINESE.
